home - Kutuo

Traffic Controller

Home / Products / Traffic Controller

•Built-in central control system to ensure work stability.
•2*48 work periods for workday and holiday setting.
•Easy for maintenance and function extension by modular design.
•Input AC110V and AC220V, Can be changed by the switch.
•Yellow flashing or power off at night can be set.
•32 working menus used for any period（among 1～30 numbers customs can set it by choice）.
•The flashing state, frequency and time of each green signal light can be set or adjusted.
•It can modify the current pace of running time in the running state immediately.
•Full red, yellow flashing, step by step manual，jump in the manual，remote manual function（optional）.
•Be equipped with the hardware fault testing function (Red Light fails, Green lights up test),down grade to Yellow flash status and cut down the Red&Green light power supply when the fault happens.(Optional).
•The output part adopts zero-test technology，Change of state is under zero state switch in communication，Make the drive more safe and reliable.
•Each output all the way with independent lightning protection circuit.
•Equipped with Installation testing capabilities and it can be used to test if each light is correctly installed.
•30 menus can be used for backup and recovery.
•The setup software can operated offline，Project data can be stored on the computer and can be copied.

Technical Parameters

Items	Technical Parameters
Executive Standard	GB25280-2010
Working Voltage	AC110V/220V±20% (changed by switch)
Working Frequency	47Hz~63Hz
No-load power	≤15W
The whole controller rated load power	2200W
Motor operation sequence（special timing state should be statement before production）	all Red(can setup) →green light→green flash can setup) →yellow light→Red light
Pedestrian signal operation sequence	all Red(can setup) →green light→Green flash(can setup)→Red light
Rated drive current in each way	3A
Surge current in each way	≥100A
Maximum independent output channels	22
Maximum independent phase	8
Adjustable menus	16
Can be setup menus number	30
The largest number of each menu	24
The largest number of timers in each day	24
Running time in each step	1～255
Full red transition time	0～5S
Yellow light transition time	1~9S
Green flashing time	0~9S
Operational Temperature Range	-40℃~+80℃
Relative Humidity	<95%
Setting Saving Time(the electricity was cut off)	10 years
Time Error	Error/year<2.5 minutes (25±1℃)